Embedded Pole for Vacuum Interrupter

We are a factory specializing in the production of Embedded Pole For Vacuum Interrupter，It is made of epoxy resin by advanced automatic pressure gel (APG) technology. Its appearance, mechanical and electrical properties are good. Through APG technology, the miniaturized ultra-low resistance vacuum interrupter and other components of the main circuit are directly wrapped in epoxy resin.We look forward to becoming your long-term partner in China.

Send Inquiry

Product Description

1. Product Introduction

The Embedded Pole For Vacuum Interrupter adopts insulating materials to reliably seal and combine the vacuum arc extinguishing chamber with the conductive elements of the main circuit, and the insulation support is integrated. It has the advantages of simple assembly, stable weight, high reliability and strong resistance to environmental pollution.

2. Product Parameter (Specification)

SEP-12/630(1250、1600）-31.5P1
Main Technical Specification
	Parameter name	Unit	Value
1	Rated frequency	Hz	50
2	Rated Voltage	kV	12
3	Rated short-time（1min） power-frequency withstand voltage	kV	48
4	Rated lightning impulse withstand voltage（Peak）	kV	85
5	Rated Current	A	630/1250/1600
6	Rated short-circuit breaking current	kA	31.5
7	Breakding operations of rated short circuit breaking current	Times	30
8	Rated short-time withstand current	kA	31.5
9	Rated duration of short-circuit	s	4
10	Rated peak withstand current	kA	80
11	Rated short-circuit making current	kA	80
※12	Rated breaking current of single capacitor	A	400/630
※13	Rated breaking current of back-to-back capacitor bank	A	400
14	Circuit resistance at lowest rated contact force	μΩ	≤25
15	Closing force due to bellow and atmosphere	N	110±40
16	Force required to hold contacts open at full stroke	N	150±50
17	Contacts limit erosion	mm	3
18	Mechanical endurance	Times	10000
19	Storage life	years	20
20	Magnitude of partial discharge（13.2kV）	pC	≤5
21	Rated operating sequence	O-0.3s-CO-180s-CO
（Mechanical date of matching switchgear）
1	Clearance between open contacts	mm	9±1
2	Over-travel	mm	4±1
3	Average opening speed (0～75% contact gap)	m/s	1.1±0.2
4	Average closing speed(30% contact gap-contact close position)	m/s	0.7±0.2
5	Rated added external contact final force	N	3100±200
6	Contact bouncing duration at closing operation	ms	≤2
7	Closing and Opening non-simultaneity of three-phase contacts	ms	≤1
8	Maximum Rebound during opening	mm	≤2
Meets or exceeds the electrical endurance requirements of class E2 for autoreclosing duty per IEC 62271-100 and GB1984-2014


※Rated characteristics to be given on request
※Rated characteristics to be given on request

3. Product Feature and Application

Embedded Pole For Vacuum Interrupter features:

High dielectric strength without any additional external precautions;

Best protect the vacuum interrupter from moisture, dust and external damage;

Applicable to all possible climatic conditions and site altitude;

Absolutely reliable and long service life;

Easy to install on the circuit breaker;

The highest quality standards;

Maintenance free;

Effectively improve the dielectric strength without using greenhouse gases

More reliable, low noise, small size, stronger structure, convenient installation, more environmental protection and maintenance free.

4. Product Details

EP series embedded pole is an essential component of medium and high voltage circuit breaker. With vacuum as the medium, it can respond to arc extinguishing in time when the high-voltage circuit is cut off. It can be applied to indoor and outdoor vacuum circuit breakers, medium voltage switchgear and other power transmission and distribution systems. The current of vacuum interrupter can be 400A, 630A, 1250A, 2000a, 2500A, 3150A, or even 4000A. It can be applied to the rated voltage of 12kV, 24kV or 36kV.Embedded Pole For Vacuum Interrupter is a good choice.

5. Product Qualification

Embedded Pole For Vacuum Interrupter: CE, CCC, CQC, IP68, ISO9001-2015

Realize zero defect of products and wholeheartedly provide customers with high-quality products with stable quality, reliable performance and high added value.

6. Deliver,Shipping and Serving

1. Your inquiry will be replied within 24 hours.

2. We offer you professional service in fluent English.

3. Keep the mass production as the sample in high quality

4. Freight forwarder: faster, safer, and convenient.

5. Quality: we have QC on each process,provide high quality products.

Any problem or needed please feel free let us know, we are glad to service for you

We are factory, we can provide competitive price. And all the products will be shipped after quality inspection. Usually we quote within 24 hours after we get your inquiry.

7. FAQ

Q1: Are you a trading company or factory?

A1:We are factory with more than 10 years experience in this field.

Q2: how about the quality control in your factory?

A2: all products will be 100% inspected before shipment.

Q3: When can I get the price?

A3: Usually we will quote within 24 hours after receiving your inquiry.

Q4: What is the acceptable payment term?

A4: Credit Card, West Union, Paypal or T/T.

Q5: How could I get a sample?

A5: if you can’t buy our product in your local area, we can send a sample to you. Sample will be charged by retail price, and plus all related shipping costs. Express delivery charge depends on the quantity of the samples.

Hot Tags: Embedded Pole for Vacuum Interrupter, Manufacturers, Suppliers, Buy, Factory, China , CE, Wholesale, Quotation, Quality, Brands